Search
Search Criteria
Products meeting the search criteria
-
45 ACP Brass Large Primer Pocket (45ACP-LPP)45 ACP Once fired brass - Large Primer Pocket Brass for reloading.
Brass have been sorted out of defects.
Brass was tumbled to a shine.
Mix HS Majority FederalAdd to Cart9¢ -
40 S&W Once Fired Brass Tumbled (40SW)40 S&W Once Fired tumbled Brass for reloading.
Brass have been sorted out of defects.
Brass was tumbled to a shine.
Mix HeadstampAdd to Cart5¢ -
223 Once Fired Brass Fully Processed Ready to Load (223/556-FP).223 / 5.56mm Once Fired Brass Fully Processed Ready to reload..
- Brass is hand sorted
- Full Length Re-Sized
- De-Primed
- Trimmed to 1.753 (+- 0.002)
- Crimp Removed using Dillon Swager
- Pockets uniformed
- Cleaned and tumbled in SS Media to a shine.
- Mix HS
Add to Cart12¢ -
45 ACP fired Brass Nickel Large Pocket Primer (45-ACP-LPP-Ni)45 ACP Large Primer Pocket NIckel Brass for reloading.
Brass have been sorted out of defects.
Brass was tumbled to a shine.
Mix HSAdd to Cart10¢ -
38 Special Once Fired Brass (38spl)38 Special Once Fired tumbled Brass for reloading.
Brass have been sorted out of defects.
Brass was tumbled to a shine.
Mix HeadstampAdd to Cart6¢ -
7mm Remington Mag once fired Brass (7mm-Rem-mag-TC)7mm Rem Mag Once fired brass
Brass have been sorted out of defects.
Brass was tumbled to a shine.
Mix Head StampAdd to Cart50¢ -
7.62x39 Once Fired Brass Tumbled Boxer Primers (7.62x39-Boxer)7.62 x 39 Brass Once Fired tumbled Brass for reloading.
Boxer Primers
Brass have been sorted out of defects.
Brass was tumbled to a shine.
Mix Headstamp
AK-47 , SKSAdd to Cart20¢ -
9mm Once Fired Brass - Tumbled Clean (9mm-TC)9mm Luger Once Fired tumbled Brass for reloading.
Brass have been sorted out of defects.
Brass was tumbled to a shine.
Mix HeadstampAdd to Cart5¢ -
300 AAC Blackout LC Headstamp (300AAC-LC)Delivery Note: Due to ordering "waves" of LC headstamp delivery can be between 1-7 days
depand on stock availability, if you need the brass urgent please let us know and we wil do our best to ship faster.
300 AAC Blackout LC (Lake City) Head Stamps converted from 223 Once Fired brass
Mostly LC 12, 13 & 09
We do the following proccess on the brass:- Cut to rough length
- Form the brass in Hornady dies on our Dillon 1050 Super
- Clean the brass in SS media and soupy water with lemishine
- Trim the brass to SAMMI spec's 1.355 +-0.003
- Remove any Mil Crimp (Swage)
- Uniform Pockets
- Chmafer and deburr neck mouth
- Package in Heavy Ziploc bag
- Ziploc bag goes into USPS Tryvak bag
- Boxed and ship Priority Mail (1-3 days delivery anywhere in USA, per USPS claims)
Add to Cart15¢ -
308 Once Fired Tumbled Nickel Brass (308-TC-Ni)308 / 7.62x51 Brass / Nickel Once Fired Tumbled .
Brass have been sorted out of defects.
Brass was tumbled to a shine.
Most Cases areAdd to Cart25¢ -
50 BMG (.50 Cal) Once Fired Brass for reloading. (50-BMG).50 BMG (50 Cal) Once Fired Brass for reloading.
Brass have been sorted out of defects.
Brass was tumbled to a shine in Stainless Steel Media.
Mix Headstamp (Many LC Hs)Add to Cart49¢ -
223 Once Fired Brass Tumbled (223/556-TC)223 / 5.56 Once Fired Brass Tumbled and cleaned to a shine.
All defective brass was sorted out.
------------------223 / 5.56 Cartridge information ---------------------------
Read full article at wikipedia http://en.wikipedia.org/wiki/.223_Remington
Specifications Parent case .222 Remington Case type Rimless, bottleneck Bullet diameter .224 in (5.7 mm) Neck diameter .253 in (6.4 mm) Shoulder diameter .354 in (9.0 mm) Base diameter .376 in (9.6 mm) Rim diameter .378 in (9.6 mm) Rim thickness .045 in (1.1 mm) Case length 1.76 in (45 mm) Overall length 2.26 in (57 mm) Rifling twist 1 in 12 inch (military style rifles use 1:7 to 1:10 to stabilize longer bullets) Primer type Small rifle Maximum pressure (SAAMI) 55,000 psi (380 MPa) Maximum pressure (CIP) 62,366 psi (430.00 MPa) Maximum CUP 52000 CUP Ballistic performance Bullet weight/type Velocity Energy 36 gr (2 g) JHP 3,750 ft/s (1,140 m/s) 1,124 ft·lbf (1,524 J) 55 (3.5 g) Nosler ballistic tip 3,240 ft/s (990 m/s) 1,282 ft·lbf (1,738 J) 60 (3.9 g) Nosler partition 3,160 ft/s (960 m/s) 1,330 ft·lbf (1,800 J) 69 (4.48 g) BTHP 2,950 ft/s (900 m/s) 1,333 ft·lbf (1,807 J) 77 (5 g) BTHP 2,750 ft/s (840 m/s) 1,293 ft·lbf (1,753 J) Test barrel length: 24 inches (61 cm)
Source(s): Federal Cartridge[1]
.223 Remington versus 5.56 mm NATO[edit]
While the 5.56mm NATO and .223 Remington cartridges and chamberings are very similar, they are not identical.[8]
The NATO specification allows a higher chamber pressure. NATO EPVAT test barrels made for 5.56mm NATO measure chamber pressure at the case mouth, as opposed to the location used by the United States civil standards organization SAAMI. The piezoelectric sensors or transducers NATO and SAAMI use to conduct the actual pressure measurements also differ. This difference in measurement method accounts for upwards of 137.9 megapascals (20,000 psi) difference in pressure measurements. This means the NATO EPVAT maximum service pressure of 430 megapascals (62,000 psi) for 5.56mm NATO, is reduced by SAAMI to 379.21 megapascals (55,000 psi) for .223 Remington.[7] In contrast to SAAMI, the other main civil standards organization C.I.P. defines the maximum service and proof test pressures of the .223 Remington cartridge equal to the 5.56mm NATO.
Read full article at wikipedia http://en.wikipedia.org/wiki/.223_Remington
Add to Cart6¢ -
223 Once Fired Brass DePrimed Brass (223/556-DP).223 / 5.56mm Once Fired Brass DePrimed Brass.
Brass was Deprimed and ReSized.
Tumbled to a Shine.
Mix HS Majority is .223 LC and FCAdd to Cart10¢ -
45 ACP Brass Small Primer Pocket (45ACP-SPP)45 ACP Small Primer Pocket Brass for reloading.
Brass have been sorted out of defects.
Brass was tumbled to a shine.
Mix HS 90% BlazerAdd to Cart9¢ -
308 Once Fired Tumbled Brass (308-TC)308 / 7.62x51 Once Fired Brass
Tumbled and Cleaned.
Brass have been sorted out of defects.
Brass was tumbled to a shine.
Mix Head StampAdd to Cart14¢ -
308 Once Fired DePrimed Brass (308-DP).308 / 7.62x51 Once Fired DePrimed Brass for reloading
Brass was Deprimed and full length ReSized.
Tumbled to a Shine in stainless steel media.
Primer pockets swaged to remove military crimp
Mix Head stampsAdd to Cart17¢ -
223 Once Fired Brass Tumbled Bent Neck for conversions only! (223/556-Bent)223 / 5.56 Once Fired Brass Tumbled and cleaned.
These are BENT neck and good for conversions only.
This brass is not good for reloading as 223 only good for conversions to 300 blackout 22 STM Etc..
Body of the brass is good but the necks are bent and dented in a way they would need to be cut off.
Conversion only Brass!Add to Cart4¢ -
270 Winchester brass (270-win)270 Win Brass
Brass have been sorted out of defects.
Brass was tumbled to a shine.
Mix Head StampAdd to Cart25¢ -
30-06 Fired Brass (30-06-TC)30-06 Fired Tumbled Brass.
Brass have been sorted out of defects.
Brass was tumbled to a shine in wet Stainless Steel Media .
Mix Head Stamp, Mostly commercial Brass.Add to Cart19¢ -
38 Special Once Fired Nickel Brass (38spl-Nickel)38 Special Once Fired tumbled Nickel Brass for reloading.
Brass have been sorted out of defects.
Brass was tumbled to a shine.
Mix HeadstampAdd to Cart7¢
